Shenzhen GOOD TAKE industry and Trade Co., Ltd.

Home > Dump Switch > Dump Switch

Dump Switch

The photoelectric signal is used to detect whether the object is toppled and output the high and low level signal control circuit. The photoelectric toppling switch is divided into two installation modes, vertical to the detected object and horizontal to the detected object.

▶

◀

Instructions

Share To：

Dump Switch · Product Features

Small overall dimension

9.8mm*9.3mm*11.1mm

Low power consumption

Consumption per hour: 75mW

Fast response time

Response time: 15us

360 ° full cycle detection

When the product tilts in any direction and exceeds 45 ± 10 degrees, the output is low level

Accurate detection angle

When the product is upright, the output level is high. When the product tilts in any direction and exceeds 45 ± 10 degrees, the output is low level

Application Products Video Presentation

Product Main technical parameters

Parameter		Symbol	Min	Typ	Max	Unit	Test Condition
Inp Emitter	Forward Voltage	VF		1.2	1.3	V	IF=20 mA
	Reverse Current	IR			10	µA	VF=5V
	Peak Wavelength	lp		940		nm
Output Detector	Collector Dark Current	ICEO		5	100	nA	VCE=20V IF=0mA Ee=0mW/cm²

	Collector-Emitter Saturation Voltage	VCE(sat)		0.1	0.4	V	IC=0.25m AIF=20mA

	Upright Dump State Collector Current	IC(of)			0.15	mA	VCE=5V IF=20mA

	Dump State Collector Current	IC(on)	0.5	5	-	mA	VCE=5V IF=20mA

Transfer Characteristics	Rise Time	Tr		15		µS	Vcc=5V Ic=1mA RL=1000Ω
	Fall Time	Tf		15		MS

Instructions

Application Area

Photoelectric dumping switch, suitable for all kinds of small solar heaters, electric heaters, electric fans, air purifiers, mobile air conditioners, dehumidifiers and other products and all applications that need power off or alarm after dumping